Deep Groove Ball Bearing

Deep groove ball bearings are capable of operating at high speeds and are widely used radial bearings. These non-separable bearings are available in a wide variety of seal, shield and snap-ring arrangements. It requires little attention or maintenance in service.

Physical Characteristics of Deep Groove Ball Bearings

Advantages of Deep Groove Ball Bearings
Can sustain radial, axial, or composite loads.
Can provide both high-running accuracy and high-speed operation.
Can take the place of high speed angular contact ball bearings.
Simple design.
Maintenance free.
Longer service life.

Application Of Deep Groove Ball Bearings
Deep groove ball bearings are widely used, when

 

Buying Tips Selecting Deep Groove Ball Bearings Before selecting a deep groove ball bearing you should take note of the followings: Material - Chrome steel, High temperature steel, ball material Maintenance requirements bearing applications Service life Bearing clearance Sealing efficiency Contamination exclusion and grease retention Low-friction seals for energy saving

 

Types Of Deep Groove Ball Bearings

Small shielded - The smaller shielded bearings have a sheet steel shield forming a long sealing gap. These bearings are preferred for application where the inner ring rotates. The rotation of outer ring may cause spilling of grease.

Large shielded - The larger shielded bearings do not have a cylindrical section in the shield bore. These bearings are preferred for application where the inner ring rotates. The rotation of outer ring may cause spilling of grease.

Low friction seal - In the ball bearings with a low friction seal, the lip of the seal forms a narrow gap with the land of the inner ring making it non-rubbing type. These seals allow same quality as in shields with a better sealing. They are made of oil and synthetic rubber with a sheet steel reinforcement. Operating temperature is -40° C to 120° C.

Sealed ball bearings - In the sealed ball bearings the sealing lips seal against the recesses of the inner ring and the outer diameter of the seal form the outer diameter of the outer ring. They are made of oil and synthetic rubber with a sheet steel reinforcement. Operating temperature is -40° C to 120° C. At higher speeds the grease may leak out.

 

Deep Groove ball bearings with an outside diameter less than 9 mm are known as Miniature ball bearings.   Deep Groove ball bearings with an outside diameter ~ 9 mm and a bore diameter < 10 mm are known as Extra-small ball bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease in advance.

 

Deep Groove Ball Bearings Specifications & Standards

Dimensions - The dimensions are as per the ISO recommendations.

Alignment - They have limited ability to adjust to alignment problems. There is a permissible level of angular misalignment that will not produce additional stress. It depends on the radial internal clearance, bearing size, internal design and forces acting.

Tolerance - They are usually meant for normal tolerance but can be enhanced.
Internal Clearance - The normal radial internal clearance is taken as standard but there may be certain variations. Values confirm to ISO recommendations.

Cages - There are standard cages but some may have pressed steel cage, glass fiber reinforced, or machined brass cages.

Tags:- Application & Types Of Deep Groove Ball Bearings, Deep Groove Ball Bearings Advantages

Add a comment