Fundamentals of Metal Casting Processes

Metal casting is a process in which a solid is melted by heating to a proper temperature, and the molten metal is then poured into a mould or cavity, which helps it to get a proper shape during its solidification. In this process, simple or complex shapes can be formed using any metal that can be melted. The finished components can have virtually any shape and configuration depending on the design. Moreover, in metal casting process one can improve the resistance to working stresses of the components. You can also control the directional properties and a pleasing appearance of the output can also be achieved.

Size of cast parts varies from a fraction of an inch and a fraction of an ounce to over 30 feet (10 meters) and many tons, depending on its application. Metal casting has its advantages over other processes in the production components, where:

Metal casting is widely used and one of the most popular manufacturing processes, because of the advantages mentioned above.

 It's now almost impossible to think of a design that can't be casted using available casting processes. But for optimum results and cost effectiveness, the designers should understand all possible options before making the final design and use it in the most efficient manner. Metal casting processes differ mainly in the material used for making moulds, i.e. sand, metal, etc., and the method of pouring molten metals, i.e. gravity, vacuum, low pressure, or high pressure. All these processes focus on some common requirement:

Tags:- Factors In Casting Process, Mould Casting Process

Add a comment