Whirlpool Tubs Maintenance Tips

Whirlpool tubs are expensive bathroom fixture and your life long partner. Hence special care is needed to prevent the accumulation of stains in them. Most importantly, this is also necessary for hygienic bath. On a regular basis clean your tubs using mild detergent. The use of abrasive cleaners like hard detergents and disinfectants should be avoided.

 

Before cleaning the whirlpool tubs make sure that you have adjusted the jets so that there is no air induction. The tub should be filled with hot water to a level above the highest jets. Low foaming dishwasher detergent like Calgonite or Cascade and household bleach should be added to water. After the addition start the whirl pool for few minutes. For better results run the whirlpool with the air control fully open. After the process is ended drain the tub and wipe it dry with soft cloth or sponge.

 

Precaution Don't start the whirlpool if the water is below the highest jet. In such a situation, the pump seal can be damaged that may result in the pump failure or leakage. Also the use normal detergent, disinfectant or soda do not give effective result.

 

Tags:- Maintaining Tubs, Whirlpool Maintenance Tips

Add a comment